Factory and quality
Explore cast iron manufacturing, finishing, inspection, packaging, and shipment preparation, with quality requirements defined for each project.
Production areas
The photographs below show molding equipment, finishing work, surface-treatment racks, and inspection equipment.
Two automated DISAMATIC vertical moulding lines.
An operator grinds a cast iron part at a finishing workstation.
Cast iron parts hang from racks along a coating line.
Inspection equipment arranged on benches in the quality-control room.
Manufacturing process
Each project begins with the buyer's product requirements. Chandar then reviews feasibility, tooling, sampling, production, inspection, packaging, and shipment needs.
The buyer provides a drawing or sample photo, target quantity, surface requirement, packaging need, and destination market.
Chandar reviews casting feasibility, tooling needs, finishing requirements, inspection expectations, and other project requirements.
Chandar prepares a quotation based on design complexity, tooling requirements, material, surface finish, packaging, and order quantity.
If custom tooling or a sample is required, Chandar confirms the tooling, sampling, and approval plan before production.
Chandar confirms the casting, finishing, surface-treatment, inspection, and packaging requirements against the approved sample or specification.
The agreed project plan defines the dimensional, surface, packaging, labeling, and pre-shipment checks required before dispatch.
Quality control
Inspection and testing requirements are agreed for each project from the drawing, finish specification, packaging plan, destination, and applicable document requirements.
The buyer identifies any material grade, composition, traceability, or batch-document requirements, and Chandar confirms what can be supported for the project.
When custom tooling or sampling is required, the buyer and Chandar agree the approval criteria before production.
The project specification can define casting and visible-surface criteria appropriate to the part and its application.
The buyer marks critical dimensions, fit surfaces, and assembly interfaces so Chandar can confirm the applicable inspection plan.
The confirmed specification defines the coating or surface-finish requirements and any related acceptance criteria.
The buyer provides packaging, labeling, carton or pallet, and destination requirements so Chandar can confirm the project-specific pre-shipment plan.
Project inquiry
Share the product-specific inspection, finish, packaging, and document requirements Chandar should review for the project.
Packaging and shipment
Confirm packaging expectations together with product weight, surface protection, carton or pallet method, labels, and destination requirements.
Packed cartons in the warehouse area before shipment preparation.
Packed pallets stored in the warehouse before shipment preparation.
Certificates and test reports
Review available ISO-related documentation and SGS test reports by holder, issuer, report number, date, submitted sample, result, and test scope.
| Document | Holder / Client / Sample | Document scope | Applicability | |
|---|---|---|---|---|
| Yingde Huajin ISO 9001 certificate | Yingde Huajin Industrial Co., Ltd. | Production of cast iron pan supports, grids, griddles, fireplaces, and other cast iron components. | Yingde Huajin Industrial Co., Ltd. is a Chandar cooperating factory. The displayed ISO certificate is held by Yingde Huajin, not Chandar. | Open Yingde Huajin ISO 9001 certificate PDF |
| Food-contact leachable lead/cadmium sample test | Cast iron griddle; black enamel sample provided by the client | US FDA CPG Sec. 545.400 and CPG Sec. 545.450 leachable lead and cadmium testing. | Applies only to the named sample and the lead and cadmium leachability tests stated in the report. | Open SGS FDA lead and cadmium test report PDF |
| PFAS content sample test | Cast iron griddle; black enamel sample provided by the client | The 671 PFAS substances listed within the report's stated test scope. | Applies to the named cast iron griddle sample and listed PFAS test scope. | Open SGS PFAS content test report PDF |
| REACH/SVHC submitted-sample screening | Cast iron pan support; black surfaced metal sample | REACH/SVHC screening scope and thresholds stated in the report. | Applies to the submitted cast iron pan support sample and the REACH/SVHC screening scope stated in the report. | Open SGS REACH SVHC screening report PDF |
| RoHS submitted-sample substance test | Cast iron pan support; black surfaced metal sample | Substances and limits stated in RoHS Directive (EU) 2015/863 and the report. | Applies to the submitted cast iron pan support sample and the RoHS substance scope stated in the report. | Open SGS RoHS test report PDF |
Applicability
SGS test reports apply only to the submitted samples and test scopes named in each report. Yingde Huajin Industrial Co., Ltd. is a Chandar cooperating factory. The displayed ISO certificate is held by Yingde Huajin, not Chandar.
Printed validity shown through Aug 1, 2029.
For a new product, finish, packaging method, or destination market, confirm whether a current report, updated sample test, or additional qualification file is needed.
Inquiry guidance
Document relevance is project-specific, especially when the product, finish, use case, or destination changes.
Send the product drawing, sample photo, quantity, finish, packaging method, target market, testing standard, and documentation or qualification requirements through the contact page.
Contact ChandarRFQ preparation
Include the product specification, quantity, finish, packaging, destination, and inspection requirements Chandar needs to assess the project.
Factory process video covering production, finishing, inspection, packaging, and shipment preparation.
Watch factory process video on YouTubeDirect contact
Send your drawing, sample photo, target quantity, finish, packaging method, destination, and testing needs by email or WhatsApp.
